Awesome FPV and Drone Videos - On Tap!

FPVTV is dedicated to bringing you the very latest FPV flying videos from across the net

How To Assemble the HobbyKing Bixler KIT version Step By Step Guide

By GuteBysen, 14 Aug 2012 into Bixler in Fixed Wing Watch on YouTube »

Dear Youtuber. Thank you for watching. Below you will find all needed products if you are thinking of getting a good beginner plane for your FPV platform or just want a really nice flying glider.

To get the right price please make sure to CLEAR your browsers COOKIES before clicking/following below links.

When logged in you can use below direct links.

Bixler KIT

Extra Equipment Required To Complete The Build:
1. XT60

2. Bullet Connectors for ESC

3. Futaba Leads for Y-Harness Cable or Servo extension for aileron channel mixing OR 20CM Futaba Lead Choose whichever cable is in stock.
Here is why you need a Y-harnes:

4. ***GLUE IS NOT INCLUDED!*** You need
Clear Foam Glue (for fuselage) and
Super Glue CA (for control horns)

5. ESC

6. Motor

7. HXT900 Servo

8. Battery Nanotech 2200mAh


9. DIY Bixler FPV Camera Mount
(Check Out Build Video Here:

10. FPV Fiberglass Pan-Tilt Camera Mount

11. Turnigy 9X TX (Recommended Radio if you do not allready have one)

12. LCD Backlight KIT (Really not needed but it looks cool!)

13. Rhino 2620mAh 3S (Low Discharge Lipo for Turnigy radio)

14. FrSky DIY KIT

15 .FrSky Telemetry RX

16. 7DB Antenna

17. Thread Locker

18. Better Propeller

19. Carbon Fibre Tube 4x750mm

20. Carbon Fibre Strip 0.5x3x750mm

Non KIT Versions of Bixler (Ready To Fly)
Bixler RTF Mode 2
Bixler RTF Mode 1

Non KIT Versions of Bixler (Almost Ready To Fly)
Bixler ARF

Bixler 2 KIT
Bixler 2 ARF

Music by Dan-O at

You might also be interested in...

Current site: #1 | Domain